1050 W maximum output power continuously
adjustable by external control.Ideal as stand-alone transmitter
or versatile exciter for power amplifiers.
87.5 ÷ 108 MHz. Instant internal or front
panel ( /C option ) frequency programmability with 10 KHz steps.
No tuning or adjustments required.
Digital stereo coder. High performances built-in
digital stereo coder (/S option) with stereo separation (> 65
dB) and signal/noise ratio (> 80 dB) for a top sound quality.
Audio processor. High performances built-in stereo
audio processor (/P option) with wide range compression threshold
and release time adjustments. Fully compatible with digital audio
mixing consoles.
Remote control. Full remote control capability
(/R option) with all main parameters in internal optional board.
Power output adjustment, on/off, alarms reset, Pfwd, Pref, frequency
deviation measurement and alarms status are the main possibilities
of remote control function.
FSK IDer. FSK option makes the FT transmitter
series fully compatible with FCC automatic identification system.
Top quality sound. The generated signal is characterized
by an excellent signal/noise ratio and by negligible residual AM
and FM. All this guarantees the best quality of the broadcast signal.
High frequency stability in short and long terms
is assured by Digital Phase Locked Loop circuit with low drift quartz.
For better frequency stability the /HS option is available.
Deviation limiter. Limits the maximum frequency
deviation to a value within the international requirements. This
is to avoid adjacent channels invasion in case of accidental over
modulation.
Electronic protections: in event of overvoltage
(O.V.P.) or transmitting frequency error (LOCK) or mismatching (VSWR)
or overtemperature (TEMP) the power output is automatically reduced
to keep your station on the air. Every alarm event is displayed
by front panel LEDs.
Meters: forward power, reflected power, frequency
deviation, all internal mains power supply voltages, L & R,
MPX levels are continuosly displayed by front panel meters.
Adjustments and settings. Output power (PWR adj.),
frequency deviation (DEV adj.), transmitting frequency (with /C
option), compression threshold and level together with release time
(with /P option), manual/remote function (with /P option), mono/stereo
function (with /S option) are front panel available for instant
adjustment and setting.
Switching mode power supply. High efficiency switching
mode power supply gives greater reliability and reduce the power
consumption.
48 Vdc battery operation is also available as
option (/VDC-48).
Meets or exceeds international standards for safety
and electrical specifications.